Skip to main content

Litepanels-Hilfecenter

[en] WiFi Settings

[en] WiFi Settings allow for selection of Input Protocol and Network IP Address configuration

[en] This is an overview of the WiFi menu options on the Astra IP. For more detailed directions about connecting to a WiFi network please see: [en] WiFi Control as a Client

[en] WiFi Client Settings

[en] The Astra IP is capable of connecting to a WiFi network. The WiFi settings are as follows:

  • [en] WiFi Radio: Enable/Disable - This setting allows you turn the WiFi radio on or off

  • [en] Set Network:

    • [en] Set Password: When a WiFi SSID is selected the Password Prompt will appear

    • [en] After a successful connection, the WiFi SSID will be shown here

  • [en] Forget Network: Clears the current WiFi connection

[en] WiFi Protocol Settings
  • [en] Protocol Select: sACN or ArtNet input

  • [en] Multicast: Enable/Disable (option only available for sACN)

  • [en] Input Universe: sACN range 1 - 63999. ArtNet range 0 - 32767

[en] WiFi IP Settings
  • [en] IP Mode: DHCP or Static

  • [en] Save DHCP as Static: Changes the IP Mode from DHCP to Static and sets the current IP address as the Static IP.

  • [en] Set IP Address: Set a unique IP Address for the fixture. Only available when IP Mode is set to Static.

    • [en] Set an IP Preset or Edit the full IP Address

  • [en] Set Subnet: Configure the Subnet Mask address of the network. Only available when IP Mode is set to Static.

  • [en] Set Gateway: Optional. Configure the Gateway Address of the network. Only available when IP Mode is set to Static.