Skip to main content

Litepanels-Hilfecenter

[en] Load/Store to USB

[en] The fixture settings can be saved to a USB-C drive formatted MS-DOS FAT32 or exFAT that uses the MBR partition type. (GUID partitioned drives will not work).

[en] To save fixture settings press MENU to enter the Settings Menu and navigate to Load/Store.

Load-Store_pg1.jpg

[en] Settings that are saved

  1. [en] Comms Select

  2. [en] WiFi and Network settings

  3. [en] DMX Profile

  4. [en] DMX Address

  5. [en] DMX HOLD

  6. [en] FAN Setting

  7. [en] LCD Backlite DIM

  8. [en] Manual Mode DIM & CCT

Hinweis

[en] DMX Termination is not saved to USB as part of DMX Settings.

[en] Store Configuration Options

[en] When saving the fixture settings there are several options available for the DMX Address:

  • [en] Preserve Address: This will keep the current DMX address as-is and load it on every fixture that loads the configuration files.

  • [en] Auto Offset: This will offset the DMX address on each successive Load based on the DMX footprint of the saved DMX Profile. (P01 will offset by 4, P02 will offset by 6).

  • [en] Fixed Offset: Choose a custom DMX offset. For example, if set to 20, each successive load of the configuration settings will advance the DMX address address by 20.

[en] Note:If existing configuration files are in the root directory of the USB drive, they will be overwritten when using the Store Configuration option to save the fixture settings.