[en] Light Configuration & Settings
[en] Menu Navigation
[en] Navigation of the menu system is accomplished with the MENU Encoder just below the full color 2" x 1.5" LCD display.
 |
[en] The Menu Encoder is a rotary dial that is Turn-to-Select and Press-to-Enter. This encoder is referred to as MENU for navigation purposes.
[en] The Main Display shows DIM and CCT along with connection and DMX profile information
 |
[en] From the main display, press the MENU to open the system settings.
[en] Turn the MENU encoder to scroll to your desired selection, then Press MENU to enter the selection.
[en] Turn the Menu Encoder to scroll through all the Menu Pages
[en] At the bottom of any Menu page there is a BACK option to return to the previous menu or to the Main Display.
[en] Once the fixture is configured as desired, use the Load/Store menu to save the fixture settings to a USB thumb drive for later recall.
[en] Menu System
[en] Manual Mode
[en] BiColor (default Mode)
[en] Comms Select
[en] Bluetooth
[en] WiFi
[en] starCTRL
[en] Wired DMX (DMX Comms module required)
[en] Ethernet (DMX Comms Plus module required)
[en] CRMX (DMX Comms Plus module required)
[en] Wired Lead/Follow (DMX Comms module required)
[en] For information about input protocols available through the Comms Modules. See Control Options
[en] DMX Settings
[en] DMX Profiles (8bit/16bit)
[en] DMX Address (1-512)
[en] DMX Termination (enable/disable)
[en] DMX HOLD options (data loss behaviors)
[en] Fixture Settings
[en] Display Settings (Rotate, Backlite DIM)
[en] Fan Settings (Auto, High, Delayed, Off or DMX Controlled)
[en] Load/Store [Configuration to/from USB-C]
[en] Firmware Update To update the fixture's software
[en] System Menus
[en] System Info (view Firmware versions and Network information about WiFi and Ethernet settings)
[en] System Monitor (view temperatures ºC & power usage)
[en] System Faults (displays information about possible system errors and faults... i.e. Temperature, Voltage, Fan warnings, etc.)
[en] System Tests (Run a variety of self-tests on the fixture)
[en] Reset (Factory Defaults)
[en] TIP:You can return to the Main Display from anywhere in the Menu system. Simply PRESS & HOLD the MENU encoder for 3 seconds to be returned to the Main Display.