Skip to main content

Litepanels-Hilfecenter

[en] System Faults

[en] These are used for troubleshooting purposes.

[en] Behavior

[en] Status Indicator LED

[en] Fault Condition

[en] Recommended Action

[en] There is no light output

[en] Green solid on

[en] No Fault; fixture is operating normally

[en] Adjust dimmer encoder to change intensity

[en] Display shows white lighting bolt icon

[en] Yellow solid on

[en] Input voltage is low

[en] Change power source

[en] Display shows white thermometer icon

[en] Yellow solid on

[en] Fixture is approaching too high a temperature

[en] Adjust dimmer encoder to lower intensity; adjust fan settings.

[en] Display shows red lightning bolt icon

[en] Red solid on

[en] Input voltage is too low

[en] Turn fixture OFF; change power source

[en] Display shows red thermometer icon

[en] Red solid on

[en] Fixture is too high a temperature

[en] Turn fixture OFF; allow fixture to cool before resuming operation

[en] Display shows red fan icon

[en] Red solid on

[en] Fan is not operating properly

[en] Check fan and vents for stoppage or blockage; (not applicable for ASTRA IP HALF)

[en] If the Status Indicator LED turns yellow or red, the display indicates a fault condition, and/or the light fixture does not operate normally, take the recommended action above. Navigate to SETTINGS → SYSTEM →SYSTEM FAULTS for more information. If the fault conditions persist, contact litepanels.com/support