System Faults
These are used for troubleshooting purposes.
Behavior | Status Indicator LED | Fault Condition | Recommended Action |
|---|---|---|---|
There is no light output | Green solid on | No Fault; fixture is operating normally | Adjust dimmer encoder to change intensity |
Display shows white lighting bolt icon | Yellow solid on | Input voltage is low | Change power source |
Display shows white thermometer icon | Yellow solid on | Fixture is approaching too high a temperature | Adjust dimmer encoder to lower intensity; adjust fan settings. |
Display shows red lightning bolt icon | Red solid on | Input voltage is too low | Turn fixture OFF; change power source |
Display shows red thermometer icon | Red solid on | Fixture is too high a temperature | Turn fixture OFF; allow fixture to cool before resuming operation |
Display shows red fan icon | Red solid on | Fan is not operating properly | Check fan and vents for stoppage or blockage; (not applicable for ASTRA IP HALF) |
If the Status Indicator LED turns yellow or red, the display indicates a fault condition, and/or the light fixture does not operate normally, take the recommended action below. Navigate to SETTINGS → SYSTEM →SYSTEM FAULTS for more information. If the fault conditions persist, contact litepanels.com/support