Safety Notes
Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.
Warning Symbols Used in these Instructions
Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.
Warning
Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’.
Danger
Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle.
Electrical Connection
Danger
Risk of electric shock. Do not remove cover, no user servicable parts inside the product.
Warning
Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
Danger
Refer servicing to qualified service personnel.
Operation
Warning
Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.
Warning
Never use flammable or combustible materials and solvents around lights.
Caution
The product should not be used outside the operating temperature limits. Refer to the product technical specifi ations for the operating limits for the product.
Warning
Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous.
Caution
Do not directly look into the light, it can cause harm to your eyes.
Caution
Do not look at the LEDs with a magnifying glass or any otheroptical instrument that may concentrate the light output.
Note
This device is for exclusively professional use and must be operated by qualified personnel
Important
Only substitute fuses with others of the same type and value.
Important
This device must be earthed.
Important
Class 1 device. The protection conductor must be part of the power cable.
Important
Disconnect power before opening the device (authorised personnel).
Important
Avoid exposing the device to atmospheric agents such as rain, damp, etc.
Important
If the power cable is damaged it must immediately be replaced with a suitable cable exclusively available from the Litepanels assistance service or authorised Litepanels service centres.
Danger
The illuminator must never be used near to inflammable sources or materials.
Danger
Do not cover the device’s cooling ducts as they are essential for correct ventilation.
Important
Use exclusively Litepanels accessories and spare parts.
Important
Litepanels does not accept responsibility for damage or malfunctions caused by not observing these instructions or by unauthorised modifications of the device.
Damage caused by modifications or tampering are not covered by the warranty.
Important
THE ILLUMINATOR MUST BE EARTHED
Before connecting the illuminator to the power supply, ensure that the voltage and frequency used correspond to the illuminator’s nominal values. The Studio LED Plus/BICOLOR works at a voltage 90-260V monophase current and 50-60 Hz.
Maintenance
Danger
The fitting of non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.
Danger
Never attempt to service this light. Refer servicing to qualified service personnel.