Programming Control Menu
DMX ADDRESS
Allows you to set the DMX ADDRESS of the fixture.
On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].
Use the [Up] and [Down] button to scroll to DMX Address and then press [Enter].
Use [Up] or [Down] to scroll to the desired address.
Press [Enter] to confirm the selection or [ESC] to keep current settings.
Press [ESC] twice to return to the home screen.
FAN PROFILE
It lets you select the three available fan profiles of the fixture.
On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].
Use the [Up] and [Down] button to scroll to FAN PROFILE and then press [Enter].
Use [Up] or [Down] to select one of the following setting:
Normal: Maximum speed and consequently maximum effects noise level. Silent: reduces the speed of the fan, thereby reducing the noise level. Super Silent: keeps to a minimum the speed of the fan in order to silence the device.
Press [Enter] to confirm the selection or [ESC] to keep current settings.
Press [ESC] twice to return to the home screen.
LCD LIGHT
Used for automatically OFF the light on the display after 30 seconds.
On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].
Use the [Up] and [Down] button to scroll to LCD LIGHT and then press [Enter].
Use [Up] or [Down] to select ON or OFF of the backlight of the LCD.
Press [Enter] to confirm the selection or [ESC] to keep current settings.
Press [ESC] twice to return to the home screen. The setting appears on the display (on or off)
DIMMING SETUP
Enables the two different values of dimming between 8 or 16 bit
On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].
Use the [Up] and [Down] button to scroll to DIMMING SETUP and then press [Enter].
Use [Up] or [Down] to select one of the following setting:
8 bit: for normal dimming 0-100% ( one channel) 16 bit: for fine dimming 0-100% ( two channels)
Press [Enter] to confirm the selection or [ESC] to keep current settings.
Press [ESC] twice to return to the home screen. The setting appears on the display (8 or 16)
FIRMWARE
Used for displaying the software version of CPU board installed in the device.
On the Home screen press [DOWN] to scroll to Menu info and then press [Enter].
Use the [Up] and [Down] button to scroll to FIRMWARE and then press [Enter].
The LCD displays the version of the firmware installed
Press [ESC] twice to return to the home screen.
SERIAL ID
Used for displaying the Network parameters of the projector.
On the Home screen press [DOWN] to scroll to Menu info and then press [Enter].
Use the [Up] and [Down] button to scroll to SERIAL ID and then press [Enter].
The LCD displays the ID number.
Press [ESC] twice to return to the home screen.