Skip to main content

Centre d'aide Litepanels

[en] System Menus

[en] The System menus consist Info Screens, System Faults and internal diagnostic tests

[en] Under the System menu there are the following sub menus:

[en] System Menu Overview

  • [en] System Info

    • [en] Fixture Info

    • [en] Network Info

  • [en] System Monitor

  • [en] System Faults

  • [en] System Test

[en] System Info - Fixture Info

[en] The Fixture Info screen displays

  • [en] Firmware Revision

  • [en] VLPM Firmware Revision

  • [en] Serial Number

  • [en] Fixture Model

  • [en] CRMX Firmware Revision

  • [en] RDM ID

[en] System Info - Network Info

[en] The Network Info screen shows the Wired or Wireless network information if Wi-Fi or wired Ethernet are in use. This screen shows:

  • [en] MAC Address of the wireless or wired network interface

  • [en] IP Address

  • [en] Subnet Mask

  • [en] Gateway Address

  • [en] Input Universe

  • [en] Input Protocol (sACN or Art-Net)

  • [en] SSID (if Wi-Fi is in use)

[en] System Monitor

[en] The System Monitor screen shows real time power and temperature information as follows:

  • [en] Input Voltage

  • [en] Power Output (Watts)

  • [en] Daylight LED Temperature (ºC)

  • [en] Tungsten LED Temperature (ºC)

  • [en] Overall LED Temperature (ºC)

[en] System Faults

[en] If the fixture experiences a system fault, the information about the fault will be displayed here. This can be useful for troubleshooting and technical support. For a list of possible system faults please see: [en] System Faults

[en] System Tests

[en] These are a series of system tests meant for troubleshooting and technical support situations.

Dans cette section​: