Skip to main content

Centre d'aide Litepanels

[en] Programming Control Menu

[en] DMX ADDRESS

[en] Allows you to set the DMX ADDRESS of the fixture.

  1. [en] On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to DMX Address and then press [Enter].

  3. [en] Use [Up] or [Down] to scroll to the desired address.

  4. [en] Press [Enter] to confirm the selection or [ESC] to keep current settings.

  5. [en] Press [ESC] twice to return to the home screen.

[en] FAN PROFILE

[en] It lets you select the three available fan profiles of the fixture.

  1. [en] On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to FAN PROFILE and then press [Enter].

  3. [en] Use [Up] or [Down] to select one of the following setting:

    [en] Normal: Maximum speed and consequently maximum effects noise level. Silent: reduces the speed of the fan, thereby reducing the noise level. Super Silent: keeps to a minimum the speed of the fan in order to silence the device.

  4. [en] Press [Enter] to confirm the selection or [ESC] to keep current settings.

  5. [en] Press [ESC] twice to return to the home screen.

[en] LCD LIGHT

[en] Used for automatically OFF the light on the display after 30 seconds.

  1. [en] On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to LCD LIGHT and then press [Enter].

  3. [en] Use [Up] or [Down] to select ON or OFF of the backlight of the LCD.

  4. [en] Press [Enter] to confirm the selection or [ESC] to keep current settings.

  5. [en] Press [ESC] twice to return to the home screen. The setting appears on the display (on or off)

[en] DIMMING SETUP

[en] Enables the two different values of dimming between 8 or 16 bit

  1. [en] On the Home screen press [DOWN] to scroll to Menu setup and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to DIMMING SETUP and then press [Enter].

  3. [en] Use [Up] or [Down] to select one of the following setting:

    [en] 8 bit: for normal dimming 0-100% ( one channel) 16 bit: for fine dimming 0-100% ( two channels)

  4. [en] Press [Enter] to confirm the selection or [ESC] to keep current settings.

  5. [en] Press [ESC] twice to return to the home screen. The setting appears on the display (8 or 16)

[en] FIRMWARE

[en] Used for displaying the software version of CPU board installed in the device.

  1. [en] On the Home screen press [DOWN] to scroll to Menu info and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to FIRMWARE and then press [Enter].

  3. [en] The LCD displays the version of the firmware installed

  4. [en] Press [ESC] twice to return to the home screen.

[en] SERIAL ID

[en] Used for displaying the Network parameters of the projector.

  1. [en] On the Home screen press [DOWN] to scroll to Menu info and then press [Enter].

  2. [en] Use the [Up] and [Down] button to scroll to SERIAL ID and then press [Enter].

  3. [en] The LCD displays the ID number.

  4. [en] Press [ESC] twice to return to the home screen.

Dans cette section​: