Centre d'aide Litepanels

[en] To ensure the maximum performance of your Studio LED X Plus/BI-COLOR it is absolutely essential that the fixture is kept clean.

[en] Regular cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.

[en] You should perform the following inspections and cleaning at least once a year. You may need to inspect or clean the fixture more often, depending on the type and amount of use.

[en] Lenses and reflecting mirror may require monthly cleaning as dust, dirt and smoke-fluid tends to building up residues, reducing the light-output very quickly. Use a clean, soft clothe to clean the lens.

[en] The cooling fan should be cleaned according to the situation (at least annually).

[en] The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet. More complicated maintenance and service operations are only to be carried out by authorized service centre.

[en] Check the correct working of the mechanical parts and, if needed, replace them. Make sure the projector is not mechanically damaged. If necessary, replace the worn parts.

[en] Check all electrical connections, in particular for correct grounding and correct attachment of all extractable connectors. Press the connectors if necessary and reposition as before.

[en] This product was constructed with high-quality materials and components, which can be reused and recycled.

[en] According to Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, at the end of their useful life, electrical and electronic equipment bearing this symbol must be collected separately and directed to the appropriate authorized WEEE recycling centre.

[en] Illegal waste disposal would result in an administrative sanction provided for in the national law.